Ditapis dengan
Automated Pick-Place of Silicon Nanowires
Pick-place of single nanowires inside scanning electron microscopes (SEM) is useful for prototyping functional devices and characterizing nanowires’s properties. Nanowire pickplace has been typically performed via teleoperation,which is timeconsuming and highly skill-dependent. This paper presents an automated approach to the pick-place of single nanowires. Through SEM visual detection and vi…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Jellyfish diversity and distribution patterns in the tropical Southwestern At…
Jellyfish are often the most prominent components of plankton, with severe consequences for fisheries and tourism. However, in tropical regions, there is much uncertainty about these consequences due to the lack of basic data. Our objective was to improve the knowledge about jellyfish in the Western Atlantic, with an emphasis on understanding diversity, abundance, and distribution patterns. Sam…
- Edisi
- 36 (2015) 93–103
- ISBN/ISSN
- 0173-9565
- Deskripsi Fisik
- Marine Ecology 2015
- Judul Seri
- Marine Ecology
- No. Panggil
- -
Blocking Effects in Warehouse Systems With Autonomous Vehicles
Autonomous vehicle-based storage and retrieval system (AVS/RS) offers considerable flexibility with respect to throughput capacity in the transfer of unit loads in high density storage areas. AVS/RS relies on autonomous vehicles to provide horizontal movement within a tier and uses lifts to provide vertical movement between tiers. In these systems, vehicle blocking delays in the aisles and cro…
- Edisi
- VOL. 11, NO. 2
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 2, APRIL 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Large-scale, seasonal habitat use and movements of yellow American eels in th…
Large-scale habitat use and movements of yellow American eels (Anguilla rostrata) from the St. Lawrence River were examined using acoustic telemetry from early summer to late fall in 2010 and 2011. Sixtyseven eels were tagged, and their passage or presence was recorded using fixed acoustic arrays covering a 400 km distance along the St. Lawrence River and Estuary. Sixty-four per cent of the 67 …
- Edisi
- 2015: 24: 99–111
- ISBN/ISSN
- doi: 10.1111/eff.121
- Deskripsi Fisik
- Ecology of Freshwater Fish 2015
- Judul Seri
- Ecology of Freshwater Fish
- No. Panggil
- -
Modeling and Analysis of Care Delivery Services Within Patient Rooms: A Syste…
Care services within the patient rooms are the most critical and time consuming processes in patient care deliveries in emergency department, clinics, and other healthcare facilities. In this paper, we introduce a Markov chain model to study such processes. A closed, parallel, and reentrant network with limited resources is used to model the process. Formulas to evaluate the patient length of s…
- Edisi
- VOL. 11, NO. 2
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 2, APRIL 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Bump and Underfill Effects on Thermal Behaviors of Flip-Chip LED Packages: Me…
Abstract—The goal of this paper is to experimentally and numerically study the thermal behaviors of flip-chip (FC) light-emitting diode (LED) packages with and without underfills and, furthermore, to compare it with conventional wire-bonding LED packages in order to understand its thermal dissipation mechanism. In experimental analyses, the junction temperature Tj and surface temperatures ar…
- Edisi
- VOL. 14, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY, VOL. 14, NO. 1, MARCH 2014
- Judul Seri
- IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY
- No. Panggil
- -
Representation and Exchange of Knowledge About Actions, Objects, and Environm…
The community-based generation of content has been tremendously successful in the World-Wide Web—people help each other by providing information that could be useful to others.We are trying to transfer this approach to robotics in order to help robots acquire the vast amounts of knowledge needed to competently perform everyday tasks. ROBOEARTH is intended to be a web community by robots for …
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Rapid ULSI Interconnect Reliability Analysis Using Neural Networks
Neural network modeling method is introduced for analyzing ultralarge scale integration (ULSI) nterconnect reliability for the first time. By training the simulation data from ANSYS (a finite-element tool), a neural network model is developed, where the prediction of ULSI interconnect reliability can be more effectively done. The proposed technique is useful for integrated circuit design since …
- Edisi
- VOL. 14, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY, VOL. 14, NO. 1, MARCH 2014
- Judul Seri
- IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY
- No. Panggil
- -
A Novel Method for Calculating Service Reputation
Owing to their rapid development, services are increasing rapidly in quantity. The consequence is that there are so many services that share the same or similar functions. Therefore, it is important to select a credible and optimal service. Reputation as one of the important parameters of services plays a significant role in the decision support for service selection. This paper proposes a nove…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Automated Cell Transport in Optical Tweezers-Assisted Microfluidic Chambers
Abstract—In this paper, we present a physics-aware, planning approach for automated transport of cells in an optical tweezers-assisted microfluidic chamber. The approach can be used for making a uniform distribution of cells inside the chamber to allow the study of a variety of biological processes, including cell signaling. Fluid forces inside the chamber, modeled using computational fluid d…
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
A Quality Flow Model in Battery Manufacturing Systems for Electric Vehicles
Improving quality in large volume battery manufacturing systems for hybrid and electric vehicles is of significant importance. In this paper, we present a flow model to analyze and improve product quality in electrical vehicle battery assembly lines with 100% inspections and repairs for defective parts. Specifically, a battery assembly line consisting of multiple inspection stations is consider…
- Edisi
- VOL. 11, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 1, JANUARY 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Data Providing Services Clustering and Management for Facilitating Service Di…
In service-oriented computing, a user usually needs to locate a desired service for: (i) fulfilling her requirements or (ii) replacing a service, which disappears or is unavailable for some reasons, to perform an interaction.With the increasing number of services available within an enterprise and over the Internet, locating a service online may not be appropriate from the performance perspecti…
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Decentralized Fault Diagnosis of Continuous Annealing Processes Based on Mult…
Process monitoring and fault diagnosis of the continuous annealing process lines (CAPLs) have been a primary concern in industry. Stable operation of the line is essential to final product quality and continuous processing of the upstream and downstream materials. In this paper, amultilevel principal component analysis (MLPCA)-based fault diagnosis method is proposed to provide meaningful monit…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Planar Compliances of Symmetric Notch Flexure Hinges: The Right Circularly Co…
This study proposes a general analytical compliance model for symmetric notch flexure hinges composed of segments with constant width and analytically defined variable thicknesses. Applying serial combination and longitudinal/transverse mirroring of base segments, the in-plane compliances of the full flexure are obtained as functions of one quarter-flexure compliances. The new right circularly …
- Edisi
- VOL. 11, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 1, JANUARY 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
User-Adaptive Sketch-Based 3-D CAD Model Retrieval
3-D CAD models are an important digital resource in the manufacturing industry. 3-D CAD model retrieval has become a key technology in product lifecycle management enabling the reuse of existing design data. In this paper, we propose a new method to retrieve 3-D CAD models based on 2-D pen-based sketch inputs. Sketching is a common and convenient method for communicating design intent during ea…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Smart Management of Multiple Energy Systems in Automotive Painting Shop
Automotive painting shops consume electricity and natural gas to provide the required temperature and humidity for painting processes. The painting shop is not only responsible for a significant portion of energy consumption with automobile manufacturers, but also affects the quality of the product. Various storage devices play a crucial role in the management of multiple energy systems. It is…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Cigarette Production Scheduling by Combining Workflow Model and Immune Algorithm
Cigarette production scheduling is vital in improving production efficiency and reducing supply delay. In this paper, a workflow model combined with an immune algorithm is proposed to solve this problem for improving production efficiency. First, the problem is formulated as a mixed-integer quadratically constrained programming model. Afterwards, the problem is transformed into a workflow reso…
- Edisi
- VOL. 11, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 1, JANUARY 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
A Multiagent Q-Learning-Based Optimal Allocation Approach for Urban Water Res…
Water environment system is a complex system, and an agent-based model presents an effective approach that has been implemented in water resource management research. Urban water resource optimal allocation is a challenging and critical issue in water environment systems, which belongs to the resource optimal allocation problem. In this paper, a novel approach based on multiagent Q-learning is…
- Edisi
- VOL. 11, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 1, JANUARY 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Building Energy Doctors: An SPC and Kalman Filter-Based Method for System-Lev…
Buildingsworldwide account for nearly 40% of global energy consumption. The biggest energy consumer in buildings is the Heating, Ventilation and Air Conditioning (HVAC) systems. HVAC also ranks top in terms of number of complaints by tenants. Maintaining HVAC systems in good conditions through early fault detection is thus a critical problem. The problem, however, is difficult since HVAC syste…
- Edisi
- VOL. 11, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 1, JANUARY 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
A State-Space-Based Prognostic Model for Hidden and Age-Dependent Nonlinear D…
Hidden or partially observable degradation state of the equipment is frequently encountered in many engineering practices. This may encourage the state space modeling technique as a feasible way to estimate equipment’s remaining useful life (RUL). However, most of the existing state space models falling into this category are based on the assumptions that the degradation process is linear or…
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Object-Oriented Templates for Automated Assembly Planning of Complex Products
In the assembly modeling of complex products, it is not unusual facing an explosive growth of assembly relations, or called combination explosion. Through integrating object-oriented methods with the knowledge template based modeling, in this paper, a new methodology is proposed to deal with the complexity of the assemblies of large-scale products. As such, the templates with various assembly r…
- Edisi
- VOL. 11, NO. 2
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 2, APRIL 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
A Unified Distance Function Framework for Workpiece Fixturing Modeling and An…
Fixtures are used in almost all modern manufacturing operations. In practice, there is a wide range of specifications on the manufacturing precision and thus different requirements on workpiece locating accuracy during each production process. In view of that, this paper developed a unified signed distance function framework. Under this framework, three systems of sensitivity equations, which …
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
An Intelligent Decision Support System for the Operating Theater: A Case Study
From long to short term planning, decision processes inherent to operating theater organization are often subject of empiricism, leading to far from optimal results. Waiting lists for surgery have always been a societal problem, which governments have been fighting with different management and operational stimulus plans. The current hospital information systems available in Portuguese public …
- Edisi
- VOL. 11, NO. 1
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 11, NO. 1, JANUARY 2014
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Modeling Load Parameters of Ball Mill in Grinding Process Based on Selective …
Due to complex dynamic characteristics of the ball mill system, it is difficult to measure load parameters inside the ball mill. It has been noticed that the traditional single-model and ensemble-model based soft sensor approaches demonstrate weak generalization power. Also, mill motor current, feature subsets of the shell vibration and acoustical frequency spectra contain different useful in…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Compassion Satisfaction, Compassion Fatigue, Work Life Conditions, and Burnou…
Frontline mental health care professionals (FMHPs) in a variety of roles such as nursing, social work, psychology, psychiatry, case managers and mental health workers are often required to provide a high degree of care to clients over time which can result in physical and psychological complaints often referred to as compassion fatigue (CF). The aim of this nonexperimental, cross sectional stud…
- Edisi
- 19(4) 255– 267
- ISBN/ISSN
- DOI: 10.1177/1534765
- Deskripsi Fisik
- Traumatology 2012
- Judul Seri
- Traumatology
- No. Panggil
- -
Exploring Combat-Related Loss and Behavioral Health Among OEF/OIF Veterans Wi…
While combat-related loss is likely to result in the development of lingering stress responses, little is known about its impact on behavioral health. The purpose of this study was to present preliminary results on war-related losses and behavioral health among Operations Enduring Freedom/Iraqi Freedomveterans. Veterans who suffered losses, to include noncombat losses (relationships back home) …
- Edisi
- 19(2) 154– 157
- ISBN/ISSN
- DOI: 10.1177/1534765
- Deskripsi Fisik
- Traumatology 2012
- Judul Seri
- Traumatology
- No. Panggil
- -
Assessment of the Psychosocial Predictors of Health-Related Quality of Life i…
Although a wide array of the scientific literature explores the links between posttraumatic stress disorder (PTSD) symptoms, coping strategies, and social support and health-related quality of life (HRQoL) as an outcome variable, their connections remain unclear. It is unknown whether PTSD symptom severity, coping strategies, and social support explain each a unique portion of variance of HRQoL…
- Edisi
- 19(1) 20– 27
- ISBN/ISSN
- DOI: 10.1177/1534765
- Deskripsi Fisik
- Traumatology 2012
- Judul Seri
- Traumatology
- No. Panggil
- -
Being in the Know: Early Adolescents’ Knowledge of Who Bullies Whom
We tested the hypothesis that early adolescents’ (N = 951) knowledge of who bullies whom is differentially distributed across peers. Knowledge of bullying was assessed by asking middle school students to nominate grademates who bullied or were bullied using physical or relational means. We hypothesized that peers who were closer to bullies and victims in the grade-level friendship network, s…
- Edisi
- 2015: 1– 33
- ISBN/ISSN
- DOI: 10.1177/0272431
- Deskripsi Fisik
- Journal of Early Adolescence 2015
- Judul Seri
- Journal of Early Adolescence
- No. Panggil
- -
The return of metabolism: biochemistry and physiology of the pentose phosphat…
The pentose phosphate pathway (PPP) is a fundamental component of cellular metabolism. The PPP is important to maintain carbon homoeostasis, to provide precursors for nucleotide and amino acid biosynthesis, to provide reducing molecules for anabolism, and to defeat oxidative stress. The PPP shares reactions with the Entner–Doudoroff pathway and Calvin cycle and divides into an oxidative and n…
- Edisi
- (2015), 90, pp. 927–963
- ISBN/ISSN
- doi: 10.1111/brv.121
- Deskripsi Fisik
- Biological Reviews 2014
- Judul Seri
- Biological Reviews
- No. Panggil
- -
Science Instruction for Students With Emotional and Behavioral Disorders
This review examined classroom science instruction for students with emotional and behavioral disorders (EBD). A total of 11 group and single-subject studies were analyzed. Across all group studies, a conservatively calculated mean effect size of .471 was obtained indicating the interventions as a whole had at least a small to moderate impact on students’ with EBD achievement. Findings were …
- Edisi
- Vol 35(1) 15– 27
- ISBN/ISSN
- DOI: 10.1177/0741932
- Deskripsi Fisik
- Remedial and Special Education 2014
- Judul Seri
- Remedial and Special Education
- No. Panggil
- -
Effects of a Comprehensive Function- Based Intervention Applied Across Multip…
This study examined the feasibility and effectiveness of a comprehensive function-based intervention applied across multiple inclusive classroom settings. The participant was a middle school student diagnosed with Asperger Syndrome who exhibited chronic off-task behaviors across all academic environments. This study was conducted across two phases: (a) A descriptive functional behavior assess…
- Edisi
- Vol 35(1) 50– 60
- ISBN/ISSN
- DOI: 10.1177/0741932
- Deskripsi Fisik
- Remedial and Special Education 2014
- Judul Seri
- Remedial and Special Education
- No. Panggil
- -
Transcriptome profiling of in vitro lines propagated from corm bud tip of ele…
The most characterised Dasheen mosaic virus andmany other unreported putative viruses are involved in the mixed viral mosaic infection of elephant foot yam (Amorphophallus paeoniifolius). The in vitro propagation of corm bud tips for virus free plantlet production was carried out in three different culture phases consisting of callusing, shoot regeneration and rooting. A 100 % survival ratewas…
- Edisi
- (2015) 143
- ISBN/ISSN
- DOI 10.1007/s10658-0
- Deskripsi Fisik
- Eur J Plant Pathol (2015) 143:363–371
- Judul Seri
- Eur J Plant Pathol
- No. Panggil
- -
Making Change: Norm-Based Strategies for Institutional Change to Address Intr…
This paper identifies and describes two new norm-based strategies for institutional change to address intractable social problems. In both strategies, advocates “foreground” and criticize norms supporting the institutional status quo before either promoting an alternative existing norm via normative reframing of the issue, or creating and promoting an entirely new norm via normative innova…
- Edisi
- Vol. 67(1) 197– 211
- ISBN/ISSN
- DOI: 10.1177/1065912
- Deskripsi Fisik
- Political Research Quarterly 2014
- Judul Seri
- Political Research Quarterly
- No. Panggil
- -
On the Implementation of Industrial Automation Systems Based on PLC
Industrial automation is largely based on PLC-based control systems. PLCs are today mostly programmed in the languages of the IEC 61131 standard which are not ready to meet the new challenges of widely distributed automation systems. Currently, an extension of IEC 61131 which includes object oriented programming as well as the new standard IEC 61499 are available. Moreover, service-oriented pa…
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Authoritarianism and American Political Behavior from 1952 to 2008
Using American National Election Studies (NES) data from 1952 to 2008—a longer timespan than any analysis to date—we evaluate the leading claims about growing polarization along authoritarian/nonauthoritarian lines and the reasons for that growth. We find authoritarianism’s impact has grown for partisanship and voting but has been consistent for policy attitudes—usually present for “s…
- Edisi
- Vol. 67(1) 71– 83
- ISBN/ISSN
- DOI: 10.1177/1065912
- Deskripsi Fisik
- Political Research Quarterly 2014
- Judul Seri
- Political Research Quarterly
- No. Panggil
- -
Effects of large herbivores on grassland arthropod diversity
Both arthropods and large grazing herbivores are important components and drivers of biodiversity in grassland ecosystems, but a synthesis of how arthropod diversity is affected by large herbivores has been largely missing. To fill this gap, we conducted a literature search, which yielded 141 studies on this topic of which 24 simultaneously investigated plant and arthropod diversity. Using the …
- Edisi
- (2015), 90, pp. 347–366
- ISBN/ISSN
- doi: 10.1111/brv.121
- Deskripsi Fisik
- Biological Reviews 2014
- Judul Seri
- Biological Reviews
- No. Panggil
- -
Social Justice in Outdoor Experiential Education: A State of Knowledge Review
Outdoor experiential education has often been critiqued for its White, male, middle/upper-class, able-bodied history, thereby causing professionals and programs to consider issues of social justice. This state of knowledge paper will review the literature on social and environmental justice, identify gaps in current social justice literature and practice, and offer recommendations for creating …
- Edisi
- Vol. 37(1) 89– 103
- ISBN/ISSN
- DOI: 10.1177/1053825
- Deskripsi Fisik
- Journal of Experiential Education 2014
- Judul Seri
- Journal of Experiential Education
- No. Panggil
- -
Resilience in Everyday Operations: A Framework for Analyzing Adaptations in H…
Managing complexity and uncertainty in high-risk sociotechnical systems requires people to continuously adapt. Designing resilient systems that support adaptive behavior requires a deepened understanding of the context in which adaptations take place, of conditions and enablers to implement these adaptations, and of their effects on the overall system. Also, it requires a focus on how people …
- Edisi
- Volume 8, Number 1, March 2014, pp. 78– 97
- ISBN/ISSN
- DOI: 10.1177/1555343
- Deskripsi Fisik
- Journal of Cognitive Engineering and Decision Making 2013
- Judul Seri
- Journal of Cognitive Engineering and Decision Making
- No. Panggil
- -
Two-Level Production Plan Decomposition Based on a Hybrid MOEA for Mineral Pr…
This paper addresses the integrated multiobjective production planning and decomposing (P&D) problem for mineral processing. A novel multiobjective 0–1 mixed integer nonlinear programming model is presented for the simultaneous P&D problem (O-model). In order to reduce the computational cost for solving O-model, a rolling horizon-based two-level decomposition approach is proposed to separate…
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Two-Level Production Plan Decomposition Based on a Hybrid MOEA for Mineral Pr…
This paper addresses the integrated multiobjective production planning and decomposing (P&D) problem for mineral processing. A novel multiobjective 0–1 mixed integer nonlinear programming model is presented for the simultaneous P&D problem (O-model). In order to reduce the computational cost for solving O-model, a rolling horizon-based two-level decomposition approach is proposed to separate…
- Edisi
- VOL. 10, NO. 4
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 4, OCTOBER 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
A High Performing Memetic Algorithm for the Flowshop Scheduling Problem With …
This paper considers minimizing makespan for a blocking flowshop scheduling problem, which has important application in a variety of modern industries. A constructive heuristic is first presented to generate a good initial solution by combining the existing profile fitting (PF) approach and Nawaz–Enscore–Ham (NEH) heuristic in an effective way. Then, a memetic algorithm (MA) is proposed in…
- Edisi
- VOL. 10, NO. 3
- ISBN/ISSN
- -
- Deskripsi Fisik
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. 10, NO. 3, JULY 2013
- Judul Seri
- IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
- No. Panggil
- -
Provisional Recommended Weight Limits for Manual Lifting During Pregnancy
Objective: The National Institute for Occupational Safety and Health (NIOSH) Revised Lifting Equation (RNLE) was adapted to derive recommended weight limits (RWLs) for pregnant workers and to develop corresponding guidelines for clinicians. Background: In the past three decades there has been a large increase in the number of women employed outside the home and remaining in the workforce dur…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 203– 214
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2014
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
Low-Back Pain Ratings for Lifetime, 1-Month Period, and Point Prevalences in …
Objective: This manuscript systematically quantifies multiple measures of low-back pain (LBP) prevalence by pain rating in a large, multisite cohort of workers. Background: Published LBP prevalence rates vary. Studies rely on one measure of LBP and none report prevalence stratified by pain rating. Method: Cross-sectional analyses of baseline data from a multicenter prospective cohort study w…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 86– 97
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
Musculoskeletal Pain and Reported Workplace Assault: A Prospective Study of C…
Objective: This study examined prospectively the effect of workplace violence on musculoskeletal symptoms among nursing home workers. Background: Previously we reported a cross-sectional relationship between physical assaults at work and musculoskeletal pain. This follow-up provides stronger evidence of the effect of workplace violence on musculoskeletal outcomes within the same workforce over…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 215– 227
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
Cumulative Spine Loading and Clinically Meaningful Declines in Low-Back Function
Objective: The objective was to assess the role of cumulative spine loading measures in the development of a clinically meaningful decline in low-back function. Background: Cumulative spine loading has been a suspected risk factor for low-back pain for many years, yet the measures that characterize risk have not been well delineated. Methods: A total of 56 cumulative exposure measures were co…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 29– 43
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
The Strain Index and ACGIH TLV for HAL: Risk of Trigger Digit in the WISTAH P…
Objective: The objective of this study was to investigate the association between job physical exposure (JPE) and incidence of flexor tendon entrapment of the digits (FTED). Background: FTED, commonly known as trigger digit, is associated with age, gender, and certain health disorders. Although JPE has been suggested as a risk factor for FTED, there are no prospective cohort studies. Method: …
- Edisi
- Vol. 56, No. 1, February 2014, pp. 98– 111
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
The Impact of Posture on Wrist Tendinosis Among Blue-Collar Workers: The San …
Objective: The objective was to evaluate the effect of wrist posture on incidence of wrist tendinosis in a prospective cohort of blue-collar workers. Background: Previous studies have identified awkward wrist posture as a risk factor for wrist tendinosis, though the magnitude of the relationship is unclear. Method: Workers (N = 413) at four industries were followed for up to 28 months with qu…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 143– 150
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
A Prospective Study of Musculoskeletal Outcomes Among Manufacturing Workers: …
Objective: The aim of this study was to characterize associations between psychosocial and work organizational risk factors and upper-extremity musculoskeletal symptoms and disorders. Background: Methodological limitations of previous studies of psychosocial and work organizational risk factors and musculoskeletal outcomes have produced inconsistent associations. Method: In this prospective e…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 178– 190
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
A Prospective Study of Musculoskeletal Outcomes Among Manufacturing Workers: …
Objective: To better characterize associations between physical risk factors and upper-extremity musculoskeletal symptoms and disorders, a prospective epidemiologic study of 386 manufacturing workers was performed. Background: Methodological limitations of previous studies have resulted in inconsistent associations. Method: An individual, task-based exposure assessment strategy was used to as…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 112– 130
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
Are Workers Who Leave a Job Exposed to Similar Physical Demands as Workers Wh…
Objective: The objective is to quantify differences in physical exposures for those who stayed on a job (survivor) versus those who left the job (turnover). Background: It has been suggested that high physical job demands lead to greater turnover and that turnover rates may supplement low-back disorder incidence rates in passive surveillance systems. Method: A prospective study with 811 parti…
- Edisi
- Vol. 56, No. 1, February 2014, pp. 58– 72
- ISBN/ISSN
- DOI: 10.1177/0018720
- Deskripsi Fisik
- Epidemiological Studies of Workplace Musculoskeletal Disorders 2013
- Judul Seri
- Epidemiological Studies of Workplace Musculoskeletal Disorders
- No. Panggil
- -
Karya Umum 
Filsafat 
Agama 
Ilmu-ilmu Sosial 
Bahasa 
Ilmu-ilmu Murni 
Ilmu-ilmu Terapan 
Kesenian, Hiburan, dan Olahraga 
Kesusastraan 
Geografi dan Sejarah