e-journal

Cu2ZnSnS4 absorber layers deposited by spray pyrolysis for advanced photovoltaic technology

---

In this work, pneumatic spray pyrolysis was used to deposit Cu2ZnSnS4 kesterite thin film layers onto soda lime glass
substrates/Mo coated substrates (substrate configuration).Furthermore, pneumatic spray pyrolysis was also tested as a
potential way to grow kesterite thin film layers on ZnO nanorod arrays on SnO2:F coated glass substrates (superstrate cell configuration). In this case semi-transparent samples were obtained. A summary of the process parameters optimization to effectively coat the ZnO nanostructures is presented. In both solar cell configurations, absorbers were selenized at 400–500 8C and compared. For the substrate configuration, we present a device with a power conversion efficiency of 1.86%, Voc¼292 mV, Jsc¼16.2 mA/cm2 and FF¼39.6%. (a) Cross-sectional SEM image of ZnO nanorods covered by
Cu2ZnSn(S1–xSex)4 in a superstrate configuration, (b) layout of the conceptual idea.

Keywords Cu2ZnSnS4, kesterites, nanorods, solar cells, spray pyrolysis, ZnO

---

Ketersediaan

Tidak ada salinan data

Informasi Detail

Judul Seri

Phys. Status Solidi

No. Panggil

-

Penerbit

: WILEY-VCH Verlag GmbH & Co. KGaA., 2015

Deskripsi Fisik

Phys. Status Solidi A 212, No. 1, 126–134 (2015)

Bahasa

English

ISBN/ISSN

-

Klasifikasi

-

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

FISIKA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Wati/Agus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar