e-journal

Spectrophotometric determination of iridium after complexation and membrane filtration

---

a b s t r a c t:
A simple, ultra sensitive and selective method for the spectrophotometric determination of Ir3+ in various synthetic and environmental samples was reported. The analyte ions were collected on a membrane filter in the form of their red complex with 5-(2-benzothiazolyl-azo)8-hydroxy-quinoline (BTAHQ), and the absorption spectra of the colored membrane filters were acquired. Effects of pH value, sample volume, and amount of BTAHQ were examined in order to optimize sensitivity. The interference by common other ions was eliminated using appropriate masking agents. The absorbance is linearly related to the concentration of Ir3+ in the ranges from 0.1 to 0.8 lg/L, and from 1.0 to 7.0 lg/L, respectively, the correlation
coefficients (R2) being 0.9996 and 0.9994. The molar absorptivities were calculated to be 4.81  105 and 4.26  107 L mol1 cm1 at 563 nm, whereas Sandell sensitivity was found as 0.391 and 0.004 ng cm2, respectively. The novelty and advantages of the proposed method is the highly sensitivity of the proposed method compared with all previously cited methods for iridium determination. Under the optimal conditions, the detection limit is 0.03 lg/L. The recoveries in case of spiked samples are between 98.7% and 101.5%, and the relative standard deviations range from 1.21% to 1.75%.

---

Ketersediaan

Tidak ada salinan data

Informasi Detail

Judul Seri

Analytical Chemistry

No. Panggil

-

Penerbit

: Elsevier., 2015

Deskripsi Fisik

Analytical Chemistry Research 3 (2014), 77-81

Bahasa

English

ISBN/ISSN

Doi: 101016/j.ancr.2

Klasifikasi

-

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

(2015), 3

Subjek

ANALISIS KIMIA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

deliza

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar